Packet Broker
EdgeLens Inline Security Packet Broker | INT40G2XR44 | 1.19.5
4.3.1 Config Maps
Config maps are unidirectional connections between an ingress port to an egress port(s).
1. Select Create Config Map on the Packet Broker Configurations panel.
The Create Config Map panel will be displayed. Any previously created filter templates will be
displayed along with the new options. Any port shaded gray can be used for a config map, any
port shaded black may not be used.
2. Select the Name pencil icon to apply a name, optional. If no name is entered the system will
automatically apply a name to the config maps as follows, map, map(1), map(2), etc.
3. Place the cursor in the Name panel and enter the name.
4. Select the Check to apply.
5. Select the Description pencil to apply a description, optional.
6. Place the cursor in the Description panel and enter the description, optional.
7. Select the Check to apply updates.
4.3.2 Ingress
1. Add an ingress port(s) 1 and/or 2 by placing the cursor on the desired port. Select with the left mouse
button. Drag the port to the Ingress panel and release. Ports may be added in any combination. If ports 1
and 2 are added, then the traffic from the ports will be aggregated.
Figure 2 Ingress
2. Remove a port by selecting the red X.
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2022 Garland Technology, LLC. All rights reserved.
24
