Garland GRASS 1265 ZSBW, Инструкция по эксплуатации

Страница: 41 / 172

English English
41/172
6.2.2. ASSEMBLING THE SACK
Lift the rear outlet cover and engage the protrusions
on the chassis of the bag (1) and (2).
6.2.3 ASSEMBLING THE LATERAL EXIT
Lift the cover from the
side exit and install the
side deflector.
6.2.4. ASSEMBLING THE MULCHING PLUG
Lift the rear outlet cover and install the mulching plug
in the rear output channel as shown in the figure.
Then lower the rear output cover.
6.2.5. FUEL
IMPORTANT: The fuel used for this machine
is highly flammable. If the fuel or the
machine ignites, put out the fire with a dry
powder
extinguisher.
Petrol and oil are extremely flammable and
explosive under certain conditions. Do not
smoke and keep flames, sparks or heat
away from the machine.
Use unleaded gasoline 95 octane.
Do not use fuel that has been stored for longer than
2 months. A fuel stored for too long will cause the
starting of the machine to be more difficult and result
in unsatisfactory engine performance. If the fuel
has been in the machine’s tank for longer than two
months, empty the tank and replace it with fuel in
perfect condition.
6.3.1. FILLING THE FUEL TANK
- Choose a suitable area to perform this operation.
- Remove the fuel tank cap and fill with fuel.
- Tightly close the fuel tank’s cap and remove all the
fuel that spilled with a dry cloth.
WARNING:
Stop the engine before refueling.
Do not start the machine in a room or enclosure. The
exhaust gases, fumes from the fuel and oil contain
carbon monoxide and harmful chemicals. In the
case of a concentration of gases produced by poor
ventilation, remove everything that prevents the flow
of clean air from the work area in order to improve
ventilation. Do not return to work in the area until you
Mulching plug
2
1