Garland GIU 2.5 BI, Инструкция по установке и эксплуатации

Страница: 16 / 40

Part # 4520895 (01/31/08) Page 16
TROUBLE SHOOTING
CAUTION Do not open the cooker, dangerous electric
voltage inside.
The cookers may only be opened by authorized service
personnel.
Stop any actions if the heating area (Ceran plate) is cracked
or broken, the induction cooker must be switched off and
disconnected from the electric supply. Don’t touch any parts
inside the cooker.
Error Messages
LED 8 LED 7 LED 6 LED 5 CODE SIGNIFICATION NOTES
- - - - - No fault, normal operation
- - - on 1 No spool current, Hardware overcurrent
- - on - 2 High spool current, Software overcurrent
- - on on 3 Temperature cooling plate
- on - - 4 Temperature cooking platform *
- on - on 5 Power rotary switch in line break
- on on - 6 Inside temperature
- on on on 7 Sensing element of cooking platform, short circuit **
on on - - 12 Power reduction cooling plate temperature ***
on on - on 13 Power reduction cooking platform temperature ***
* The induction unit can only be re-started by turning the control knob off and back on again.
** The induction unit continues working but the temperature of the cooking platform is not controlled anymore
*** The induction unit continues working with reduced power cycles.
Trouble Shooting Guide
Fault Possible Cause
Action to take through operator or
operating personnel
No heating indicator operation is OFF
(dark) No electrical supply Check if the electrical supply (cable
plugged in the wall socket), check
preliminary fuses
Control knob in OFF - position Turn control knob ON
Pan too small (bottom diameter less
than 5” (127 mm ) Use a suitable pan
Pan is not placed in the center of the
heating area (the cooker can’t detect
the pan) Move the pan to the center of the
heating area
Unsuitable pan Choose a pan which is recommended
for induction cooking *
Cooker defective Ask your supplier for repair service,
unplug the cooker from the electrical
supply