![background image](http://html1.mh-extra.com/html/garland/cm36-280/cm36-280_installation-and-operating-manual_564169009.webp)
Part # 1382669 (07/05)
Page 9
INSTALLATION Continued
2. The pressure regulator(s) installed must be listed by
a nationally recognized agency.
3. The pressure regulator(s) must have a pressure
adjustment range to allow adjustment to the
manifold pressure on the appliance rating plate.
4. Unless the manifold pressure on all connected
appliances is the same, a separate regulator must
be supplied for each appliance(s) having different
manifold pressures.
5. Gas supply lines may be connected at right, left or
both ends of a battery or at the tee connections on
spreader plates. If five (5) or more units are placed
in a battery, more that one (1) supply line should
be used. A readily accessible, approved type of
hand shut off valve (supplied by others) should be
installed on each supply line.
CAUTION: Local codes may require that the pressure
regulator be externally vented. This is to be supplied by
others.
Installation of Salamander to a Range
Model IR36-280L. GCM24-280. GCM26-280
1. The back of the range must be easily accessible
2. Position the salamander on rear of the range slipping
uprights into burner box sides.
3. Securely fasten using hardware shown.
Upright
Burner Box
Side
1/4" x 3/4"
Type "B"
Washer Hex Head SMS
4 Req'd
Assembly Instructions
Salamander/Cheese Melters
M-Series Salamanders/Cheese Melters
1. Remove front panel #5 by removing two (2) sheet
metal screws from under side of salamander/cheese
melter and pushing front panel downward.
2. With back panel #4 still attached to the left #2 and
right #3 uprights drop uprights into the rectangular
cutouts at the rear of the range
3. Fasten uprights #2 and #3 to the range #1 with four
(4) 5/16” -18 bolts and flat washers #6 and #7.
4. If unit is in a battery line up, fasten adjacent units
together at hole marked “X” with ¼” -20 bolts, nuts
and washers.
5. Install front panel #5 previously removed. Attach
front panel #5 to salamander/cheese melter with
two (2) sheet metal screws
~
1
"X"
"X"
2
8
4
3
6
7
5
GARL
AN
D
Содержание CM36-280
Страница 14: ...Part 1382669 07 05 Page 14 NOTES...
Страница 15: ...Part 1382669 07 05 Page 15 NOTES...
Страница 16: ......