![background image](http://html1.mh-extra.com/html/garland/cm36-280/cm36-280_installation-and-operating-manual_564169010.webp)
Part # 1382669 (07/05)
Page 10
INSTALLATION Continued
Models IR60-280L, GCM60-280
1. Back of range must be easily accessible.
2. Fasten mounting bracket to burner box back as
shown using four (4) of #10 x ½” type “A” truss
head SMS, Phillips.
3. Position salamander on rear of range slipping
uprights into burner box sides and mounting
bracket.
4. Make sure front panel is in front of stabilizer
bracket.
5. Securely fasten using hardware shown.
Upright
Burner Box
Back
Stabilizer
Bracket
Mounting
Bracket
Mounting
Bracket
Top
Bottom
Models IR48-280L IR72-280L,
GCM48-280, GCM72-280
1. Back of range must be easily accessible.
2. Position salamander on rear of range slipping
uprights into burner box sides.
3. Make sure front panel is in front of stabilizer bracket
on 72” range.
4. Securely fasten hardware shown.
Upright
Burner
Box Side
Stabilizer
Bracket
1/4" x 3/4"
Type "B" Washer
Hex Head (8 Req'd)
Models IR48-280L or GCM48-280 Mounting
to 48” Range with one Full Size Oven
1. Back of range must be easily accessible.
2. If mounting to a double oven, remove oven flue
from left side looking at rear of unit.
3. Place salamander in place and fasten securely, using
hardware shown.
4. Re-install oven flue
# 10 x 3/4"
Phillips Truss
Head
1/4" 20 x 3/4" Hex
Head Self Tapping
Screws (2 ea. Side)
&
1/4 x 2/4 Washer
(2 ea. Side)
End Support Bracket
Center Support
Use Existing # 10 Sheet Metal Screws
From Back Flange
Back Flange
Rear View
Remove Oven Flue for H/P288 Double Ovens Only
Содержание CM36-280
Страница 14: ...Part 1382669 07 05 Page 14 NOTES...
Страница 15: ...Part 1382669 07 05 Page 15 NOTES...
Страница 16: ......