Garkinhall Systems GKH 575, Руководство пользователя

Страница: 5 / 38

5
Setting Up
A. Unpacking
Upon receipt of your fixtures, carefully inspect the outside of the packaging and
look for any damage that may have occurred during shipping. Open the package
and carefully inspect its contents for signs of damage. Should there be any
apparent damage, notify the freight company right away. Keep all the packaging
in the event that the freight company dispatches an inspector.
B. Checking the Contents
Included in the packaging are the following items:
1. GKH 575 Color Wash luminaire
2. MDR 575 lamp
3. (2) Omega rigging brackets with quarter-turn fasteners
4. safety cable
5. User manual
C. Before Applying Power
Once you have made a visual inspection of the packaging and the fixture, you
should set it up and perform a bench test to insure that it is operating correctly.
Before applying power to the unit, make sure to follow these procedures:
1. Check to see that the voltage marked on the packaging matches that of
the power supply. In North America it should be 120V/60Hz.
2. Install the lamp.
a. Insure that the fixture is disconnected from the power source.
Caution: Surface may be extremely hot. Allow several
minutes to cool.
b. Using a Phillips screwdriver, remove the three screws on the back
of the fixture head labeled X, Y, and Z.