4.
When the internet connection is active, we can go to the next stage
which is the installation of the Garett Tracker application on our
smartphone. The main menu of the watch will be discussed in the further
part of the manual, because the full functionality of the smartwatch is
obtained after registration and configuration of it through the Garett Tracker
applications.
3.
After starting the watch, wait a few seconds until the range and internet
connection appears (the arrow icons visible in the above screenshot)
necessary for further configuration of the device. If after approx. Minute the
range and internet connection does not appear, make sure that the SIM
card meets all previously described requirements and the watch is in a
place with a strong reach. It is also worth to turn off and restart the watch.
When the reach appears and the internet connection is still not available
(no arrow icon), the problem is most likely due to the lack of APN
configuration. Configuration is done using special configuration SMS
described in the further part of the manual in the
TROUBLESHOOTING
section.
