1.
SmartWatch is charged using the cable attached to the device.
2.
Insert the micro USB end of the cable into the charging port of the watch (7)
under the rubber plug on the right side of the device. Then connect the other
end of the cable with the USB port of the computer or USB adapter, eg from a
mobile phone. When we connect the cable correctly, the charging animation
appears on the screen.
When the battery is very discharged, the
animation may appear only after several minutes.
Before the watch is turned on for the first time, it is recommended to
charge the watch for 2 hours. Charging after unloading should take at
least 2 hours.
CHARGING
SMARTWATCH INSTALLATION ON HAND
Place the watch on your wrist and adjust the length of the strap so that it is not
loose.
6
FIRST TURN ON THE WATCH
1.
When the SIM card is correctly installed in the watch and meets all the
above conditions, we can start the device by pressing and holding the power
button (2) for approx. 4 seconds.
2.
After starting the watch, I will show you the main screen displaying the most
important information, such as time, date, GSM coverage and battery level.
Before the watch is turned on for the first time, it is recommended to
charge the watch for 2 hours. Charging the watch after discharge should
take what least 2 hours.
