Programming Group Area User Codes
1)
With the display showing:-
2)
Enter a Master Code, the display may show:-
3)
Press NO five times, the display will show:-
4)
Press YES, the display will show:-
5)
Enter the user number (1 to 99) that you
wish to program followed by YES, the
display will show:-
6)
Either enter the User Code you require
followed by YES
Or
Present your G-Tag to the Reader
The display will show:-
7)
Press NO until the Code Type you require is
displayed
(Grp-Mast)
. Then press YES.
The display will show:-
Note:
This screen will not appear if User No.1 is being
programmed. Group Codes are not available for
User No.1.
8)
Use the keys 1 - 7 or 0 for C (Cleaner) to toggle
the Area/s you wish to control with this code.
When finished, press YES. Display will show:-
9)
Press YES.
01 JAN 18 : 58 : 01
Do you want to . .
SET the System ?
Do you want to . .
Prog. USER CODES ?
Enter User No. - -
(1- 99) Then YES
Now Enter Code . .
- - - - - - Then YES
Code Type
= Master ok ?
Assigned Area/s
= 1234567C ok?
Code Group
=None ok ?
GARDTEC
800 Series
User Manual
Page
33
PR5893 8.qxd 22/05/2006 11:14 Page 33