Page
3
GARDTEC
800 Series
User Manual
Introduction
The Gardtec
800 Series
of control panels consists of 3 models, the Gardtec
800
, the
Gardtec
816
and the Gardtec
872
.
Two types of display are available for the system
keypads, a) LCD offering a 32 character display with zone descriptors and user names
or, b) twin seven segment LED display. The LED type display is normally used for
setting and unsetting at secondary points.
Throughout this manual references will
be made to the specific model of control panel. You may find this information
from the user information section on page 2 of this manual.
LED keypads may be used to SET & UNSET the system, ONLY the LCD keypads
can be used to programme the 800 series control panels.
Please take time to familiarise yourself with the type of equipment fitted to your
premises as it will prove invaluable whilst using this manual.
If the Control Panel is
non EN
then all displays will be shown and
“ENTER CODE CHECK”
will not be displayed.
All information displays will remain until cleared by the User.
User Code Types
Master Level User Code EN2 (default) -
5678
EN3 (default)-
005678
(EN refers to European Grade)
.
Four types of User Codes are available on the Gardtec
800,
and six types on the
Gardtec
816,
each user code type allows for different levels of access. In total 7 User
codes may be programmed by a Master Level User Code.
User number 1 will always be a Master Level User but the remaining 6 User Codes
may be programmed (by a Master Code) to the required level of access. These may be
changed at any time via a Master level code.
The User Code levels available and the functions available for the levels are:-
1 = Set Only
Only Allows for the setting of the system.
2 = Main User
Allows Setting, Part Setting, Zone Remove (if programmed
by engineer), System Test, Unsetting, Reset after Alarm
(if programmed by engineer).
3 = User
Allows Setting, Part Setting, Reset after Alarm
(if programmed by engineer), Unsetting.
IMPORTANT USER INFORMATION
PR5893 8.qxd 22/05/2006 11:14 Page 3
