Page 9
4990497003 Date: 11/2016
TR20 Installation, Operating & Maintenance Manual
Installation
Figure 6. Oil Lubrication Components
3.4
Lubrication
The TR20 is supplied complete with oil.
When the compressor has been mounted, the oil level should be re-checked as
shown in figure 6 and topped-up with oil through, and up to, one of the fill/level plug
holes (approximately 2.5 litres total if necessary).
Key
1 - Magnetic drain plug and washer
2 - Fill plug and washer
Figure 5. Mounting Details - separate ancillary packages
Alternative mounting channels
maybe neccesary due to other
vehicle ancillaries (e.g. fuel
tank). These should provide
comparative strength to the
configuration shown.
NOTE
No.
Description
1. M16 stud
2. M16 Flanged Self locking nut, Grade 8
3. Mounting channels
4. Spacer (if required)
Taper washers should be
used if mounting channels
with tapered flanges are to be
used.
NOTE
1
4
2
3
