Gardner Denver THOMAS ASF VAKUMATIK IVF R34, Инструкция по установке и эксплуатации

Страница: 10 / 24

Leak detector Vakumatik IVF R34
Material designation
AdBlue
AHL ammonium nitrate urea sulution
(
≤
30%N)*
ASL ammonium sulphate solution (36-40%)*
Ethyl glycol, ethyl glycol monoethyl ether
Drilling oils
Boron oils
Boric acid ............................................... < GL
Brake fluid, hydraulic with flash point
>100ºC
Diesel fuel in accordance with DIN 51601
Diethylene glycol ...................................... TR
Ethylene glycol, glycol .............................. TR
Formaldehyde, aq.solution, with
formaldehyde < 5 %, FP > 100ºC
Formaldehyde, aq.solution, with
formaldehyde >=5 %, methanol < 15 %,
21< = FP < = 55ºC .......................................
Formaldehyde, aq.solution, with
formaldehyde >=5 %, methanol < 15 %, FP
>= 55ºC
Formaldehyde, aq.solution, with 37 %
formaldehyde, 10-15 % methanol content
Formalin, formaldehyde ......................... < GL
Gas oil, with FP >100ºC, BP >200ºC
Glycerine, propane-triol ............................ TR
Urea (dissolved), ammoniacal ............... < GL
Urea-formaldehyde solutions
(e.g. wood glue) ................................... < GL
Fuel oil, heating oil
Hydraulic oils
Potassium chloride ................................ < GL
Potassium iodide ................................... < GL
Potassium nitrate ................................... < GL
Potassium sulphate ............................... < GL
Magnesium nitrate ................................. < GL
Magnesium sulphate ............................. < GL
Methylene glycol
Methylester (biodiesel) E DIN 51606
(Adaptation required for leak detector
components in contact with medium)
Petroleum products with flash point
>55°C *
Sodium acetate .................................. < GL
Sodium chloride ................................. < GL
Sodium chlorite, aq. solution with > 5 %
active chlorine
Sodium fluoride .................................. < GL
Sodium hydrogen carbonate ............. < GL
Sodium nitrate.................................... < GL
Sodium sulphate ................................ < GL
Sodium sulphite ................................. < GL
Sodium thiosulphate .......................... < GL
Palmitic acid, fatty acid
(hexadecanoic acid) ............................ TR
Castor oil ............................................... TR
Shale oil with FP >100°C, BP >100°C
Lubricating oils
(base oils, non-doped) ..................... < GL
Lubricating oils
(doped, non-emulsifiable) ................ < GL
Spindel oil
Stearic acid, fatty acids
(octadecanoic) ................................... TR
Coal tar distillate with FP >100°C, BP
>100°C
Coal tar naphtha, with FP >100°C, BP
>100°C
Tars, liquid with FP >100°C
Turpentine oil substitute, with FP
>100°C, BP >100°C
Tartaric acid,
dihydroxy butanoic acid ................... < GL
FP = Flash Point GL = saturated solution
TR = technically pure * Copper materials not suitable
10