Gardner Denver L23, Оригинальное руководство по эксплуатации и обслуживанию

Страница: 26 / 64

6 Transportation and Installation
24
6 Tran sport ation and Inst allation
6.1 Transportation
Fig. 5
Fig. 6
1 R-clip
2 Hinge pin
DANGER
The compressor or parts of it may fall if
mistakes are made when lifting, and this will
put your life at risk. Safety devices my be
damaged if lifted incorrectliy.
•
Always observe the safety notes in
Section 4.5 of the user manual.
•
Never lift the compressor by or tie onto
its enclosure.
•
A suitable fork lift which complies with
local safety regulations must be used
when lifting the compressor.
•
The fork length of the fork lift must
correspond to the unit width (see
Section 12.1).
•
Keep the distance between (see Fig. 5)
and length of the forks in mind when
transporting the compressor.
•
All loose parts or parts which can swing
freely must be safely secured before the
unit can be lifted.
•
It is strictly prohibited to stand in the
danger zone of a lifted load.
•
Ensure that the transport load approach
is performed properly (according to the
user manual of the lifting device).
NOTICE
Before transporting, the R-clips (-1 - Fig. 6) and
the doors must be removed.
Only use the appropriately marked lifting points.
Shifting the system after it is lowered is not
permitted.
Weights
The following weights are approximate. They are valid
for the screw compressors including oil weight:
L23 1433 lb
L23RS 1501 lb
L26 1493 lb
L26RS 1561 lb
L29 1501 lb
L29RS 1570 lb