Gardner Denver GAF P Series, Руководство по эксплуатации и обслуживанию

Страница: 2 / 40

SB-7-622 Page 1
MAINTAIN BLOWER RELIABILITY AND PERFORMANCE
WITH GENUINE GARDNER DENVER
PARTS AND SUPPORT SERVICES
Factory genuine parts, manufactured to design tolerances, are developed for optimum dependability - - -
specifically for your blower. Design and material innovations are born from years of experience with hundreds of
different blower applications. When you specify factory genuine parts you are assured of receiving parts that
incorporate the most current design advancements manufactured in our state-of-the-art blower factory under
exacting quality standards.
Your AUTHORIZED DISTRIBUTOR offers all the backup you require. A worldwide network of authorized
distributors provides the finest product support in the blower industry.
1. Trained parts technical representatives to assist you in selecting the correct replacement parts.
2. Complete inventory of new machines and new, genuine factory parts.
3. A full line of factory tested AEON
™ PD blower lubricants specifically formulated for optimum
performance in all blowers.
4. Authorized distributor service technicians are factory-trained and skilled in blower maintenance and
repair. They are ready to respond and assist you by providing fast, expert maintenance and repair
service.
INSTRUCTIONS FOR DETERMINING BLOWER CONFIGURATION
1. Face the blower drive shaft.
2. In a
VERTICAL
configuration, air flow is horizontal.
3. In a
HORIZONTAL
configuration, air flow is vertical.
4. In a vertical configuration, a
BOTTOM HAND
exists when the drive shaft is below the horizontal
center line of the blower. A
TOP HAND
exits when the drive shaft is above the horizontal center line
of the blower.
5. In a horizontal configuration, a
RIGHT HAND
exists when the drive shaft is to the right of the vertical
center line of the blower. A
LEFT HAND
exists when the drive shaft is to the left of the vertical center
line of the blower.
INSTRUCTIONS FOR ORDERING REPAIR PARTS
For pricing, and ordering information contact your nearest AUTHORIZED FACTORY DISTRIBUTOR. When
ordering parts, specify Blower
MODEL
and
SERIAL NUMBER
(see nameplate on unit).
Rely upon the knowledge and experience of your AUTHORIZED DISTRIBUTOR and let them assist you in
making the proper parts selection for your blower.
For the location of your local authorized Gardner Denver blower distributor refer to the yellow pages of
your phone directory, check the Web site at
www.gardnerdenver.com or contact:
Gardner Denver Compressor Division
1800 Gardner Expressway
Quincy, IL 62305
Phone: (217) 222-5400
Fax: (217) 221-8780