background image

16

|

 

www.gd-elmorietschle.com

 © Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH

Set up and operation

4.3  Areas of application

These contact-free running claw vacuum pumps, the C-VLR, can be operated constantly at any pressure 
between atmosphere and an inlet pressure of

  60 mbar (abs.) 

  C-VLR  60  (31 + 32) / 100  (31) / 150  (31)

100 mbar (abs.) 

  C-VLR  60 / 150

150 mbar (abs.) 

  C-VLR 100

200 mbar (abs.) 

  C-VLR 251

The suction capacity with unrestricted suction is 60, 100, 150 and 215 m

3

/h at 50 Hz. Data sheet D-880 or 

D 880-31 shows the dependency of the suction capacity on the intake pressure.

If the unit is switched on more frequently (at regular 
intervals of about 12 times an hour (C-VLR 60 – 150)  
or 10 times an hour (C-VLR 251)) at higher ambient 
temperatures and intake temperatures, the excess 
temperature limit of the motor winding and the bear-
ings may be exceeded. 
For such operating conditions contact the manufac-
turer.
If it is installed in the open air the unit must be pro-
tected from environmental influences, (e.g. by a pro-
tective roof).

Содержание Elmo Rietschle C-VLR 60



































Отзывы: