Gardner Denver Elmo Rietschle 2BH11, Руководство по эксплуатации

Страница: 7 / 44

Safety and responsibility
2
© Gardner Denver Deutschland GmbH
7 / 44
08.2019 · 610.44434.40.000
Safety and responsibility
The manufacturer is not liable for damage caused by the failure to observe these
instructions and the related documents [
➙
6].
Explanation of warning signs
Warning sign Explanation
Danger that failure to observe the measures could lead to death or serious phys-
ical injuries.
Danger that failure to observe the measures could lead to death or serious phys-
ical injuries.
Danger that failure to observe the measures could lead to minor physical injuries.
Danger that failure to observe the measures could lead to material damage.
Correct use of the equipment
The G-BH1 | G-BH9:
▪
is a machine that is optimised for continuous operation used to generate a
vacuum or pressure
▪
can be used inside buildings, outside and in dusty or damp environments. The
protection class is indicated on the rating plate [
➙
13].
▪
Can deliver the following conveyed media:
– Air and air/gas mixtures that are non-explosive, non-combustible, non-
abrasive and non-toxic with a relative humidity of up to 100 % without
condensation forming
– Dusts ≤10 μm (at least filter class G1 according to EN779) without mois-
ture and solid matter
▪
should only be used within the limits defined in this documentation:
– Mounting conditions [
➙
21]
– Permitted conditions for use [
➙
40]
– Electrical data [
➙
42]
▪
only operate when fully assembled and in a technically perfect condition.
Other operating conditions must be agreed with the manufacturer.
Unauthorised operation
It is forbidden to:
▪
Operating in a potentially explosive area (ATEX).
▪
Connecting to a potentially explosive area (ATEX).
▪
Transporting explosive, flammable, aggressive, unstable, oxydative or poison-
ous materials.
▪
Using non-commercial facilities without making adjustments for the additional
requirements.
▪
Operating in reverse with sudden/abrupt changes in the direction of rotation.
NOTICE! This results in high drive loads and alternating stresses. The
machine can be destroyed.
▪
Use in areas with ultrasound and ionising or non-ionising radiation.
▪
Operating outside of the limits defined in this document:
– Mounting conditions [
➙
21]
– Permitted conditions for use [
➙
40]
– Electrical data [
➙
42]
2
2.1
2.2
2.3