Gardner Denver APEXVS7-11A, Руководство по эксплуатации и обслуживанию

Страница: 23 / 71

13-25-603 Page 22
Unit Hot (No warm-up period is required):
1.
Open the air service valve (customer furnished) between the main air system and the check valve on
the package.
2.
Run for approximately one minute. The unit is equipped with a minimum (65 psig) pressure/check
valve, no special procedure to maintain the unit reservoir pressure is required.
Compressed Air Dryer (Optional) – The dryer module is supplied electrical power from a separate (off-
package), disconnect provided by the end user – the disconnect must be engaged prior to dryer
operation. Relay contacts, operated by the package AirSmart controller, engage and disengage the dryer
from the external power source. The dryer is turned on when the “START” button is pressed, which also
starts the compressor system. The dryer remains powered until the “STOP” button is pressed and
remains in operation during low air demand periods that temporarily shut down the compressor. Please
refer to the dryer manual 13-18-605 for all installation, operation and maintenance instructions.
DAILY CHECK - Refer to “Maintenance Schedule,” SECTION 8 page 63.
STOPPING THE UNIT :
1.
To stop compressor operation, press STOP/RESET.
2.
Wait approximately one minute to allow the compressor to stop. The oil reservoir will automatically
blow down as the motor stops.