GARDEO PRO GPTDE1843-2L, Оригинальное руководство пользователя

Страница: 40 / 64

40
§ Lift the flap and place the grass box over the lugs.
>
The grass catcher
To fit: Raise the rear cover and hitch the grass
catcher on rear of mower.
To remove: grasp and lift rear cover, remove
grass catcher.
SETTING THE CUTTING HEIGHTS
«
Fig C »
Important!
Adjust the cutting height only
when the engine is switched
off and the power cable has
been disconnected.
Warning!
Disconnect the mower from
the power supply and ensure
the blade has stopped
coasting before adjusting the
height.
For the first cut of the season .a high cutting
adjustment should be selected.
The cutting height can be selected among 25
mm to 75 mm.
▪
To raise the blade height, grasp the height
adjusting lever and move it toward the
back of the mower.
▪
To lower the blade height, grasp the height
adjustment lever and move it toward the
front of the mower.
> 6 Cutting height positions
25 mm / 35 mm / 45 mm / 55 mm / 65 mm / 75 mm
§ 25 mm (lowest cutting height position)
~
§ 75 mm (highest cutting height position)
OPERATION «
Fig B & D »
> Connect to power supply.
«
Fig B »
Before you connect the equipment to the mains
supply make sure that the data on the rating
plate are identical to the mains data.
Connect the plug to an extension cable. It is
imperative to secure the extension cable with the
cable grip.
> Starting
«
Fig D »
Press and hold safety button (A) (then squeeze the
switch lever (B) towards the handle).
Release the safety button.
> Stopping
Release the switch lever.
ATTENTION :
After switching off, the
cutting blade will go on
turning for a few seconds,
make sure the blade has
come to a complete
standstill.
CAUTION:
Do not rapidly switch off and
on.
> Safety button
Important! To prevent the machine switching on
accidentally, the lawn mower is equipped with
a safety lock-off which must be pressed before the
switching bar can be activated. The lawn mower
switches itself off when the switch is released.
Repeat this process several times so that you are
sure that the machine functions properly.
Before you perform any repair or maintenance work
on the machine, ensure that the blade is not rotating
and that the power supply is disconnected.
Important!
Never open the discharge
flap if the grass bag is being
emptied and the motor is still
running. The rotating blade
can cause serious injuries.
Always secure the discharge flap and grass bag
carefully. Always switch off the motor before
you remove these items.
The safety distance between the blade casing and
the user provided by the guide struts must be
maintained at all times.
> Information on correct mowing
We recommend that you mow in overlapping lines.
Only mow with sharp, perfect blades so
that the blades of grass do not fray, making the lawn
turn yellow.
The cutting height should be between 4 and 6 cm
and the growth before the next cut should be
between 4 and 5 cm. If the lawn grows longer than
this on occasion, do not make the mistake of cutting
to normal length straight away since this will
damage the lawn.
Never cut the grass by more than half its height.
Keep the underside of the mower casing clean and
remove all grass deposits from it. Deposits make it
more difficult to start the mower and also adversely
affect the mowing quality and the grass discharge.