After Sales Support TEL: 1300 130 579 WEB: www.rossmac.com
10
4. Instructions
Operation
Please observe the statutory regulations
governing noise abatement during operating
times, which may differ from town to town.
Mains connection
Connect the device with an extension lead
connected to the integrated power plug (Fig.
13/Item E). Be sure to observe the relevant
information in the safety instructions.
ON/OFF switch (Fig. 13/Item B)
• Press the green knob to switch on the shredder.
• Press the red knob to switch it off.
Note:
The device has a zero voltage switch. This
prevents the device restarting unintentionally
after a power failure.
Safety switch (Fig. 12/Item A)
When using the device the shredded material
debris box must be securely in position and the
safety switch locked as shown in Fig. 12.
Direction selection switch (Fig.13/Item C)
Important! The switch for selecting the direction
of rotation can only be moved when the shredder
is switched off.
Position “ ”
The material is automatically drawn in by the
blade and shredded.
Position “ ”
The blade rotates in the opposite direction
to release jammed material. After moving the
selector switch to the “ ” position, press and
hold the green knob of the ON/OFF switch. The
blade will start to rotate in the opposite direction.
As soon as you release the ON/OFF switch, the
shredder will stop automatically.
12
13
Important!
Always wait until the shredder has
reached a standstill before you switch it on again
Large items or pieces of wood will be discharged
both in the cutting and in the release direction
after the blade has been started and reversed several
times.
Motor protection (Fig. 13/Item D)
An overload (for example if the blade is jammed
will cause the machine to cut out after a few
seconds. To protect the motor from damage the
motor protection switch stops the power supply
automatically. Wait for at least one minute before
you press the reset knob so that you can restart
the machine.
Then press the ON/OFF switch.
