S
U
A
1800 909 909
www.globalpowerbrands.com email: [email protected]
AFTER SALES SUPPORT
43670
18
Note.
If grass becomes wrapped around the spool, stop the engine, disconnect
the spark plug wire, and remove the grass.
Note.
Prolonged cutting not at full throttle may result in oil dripping from
the muffler.
Feeding the line
WARNING.
The engine of the petrol line trimmer must be at a complete stop
during assembling, repair and cleaning operations that could be necessary.
The line trimmer has a bump feed mechanism which releases the line without
having to stop the engine.
1. To release additional line, lightly tap the bump knob (18) on the ground
while operating the unit at high speed.
Note.
Always keep the line fully extended. Line release becomes more difficult
as the cutting line becomes shorter.
2. Each time the head is bumped it releases approximately 2cm of line. Release the
line until it strikes the cut off knife (2). This may require several taps.
Note.
The cut off knife (2) on the safety guard (3) will automatically cut off
any excess line. For best results tap the head on hard soil or bare ground. Never
bump the spool head on concrete as it may crack the spool housing.
IMPORTANT.
Do not hit stones (even small ones), piles of earth, and small
pieces of wood or anything else that could be hidden or poorly visible in the
grass. If you hit a large object by accident, or if you block the cutting tool due
to overloading or having the cutter jammed with grass, you must stop the
engine.
Note.
All protective devices of the machine as well as protective equipment
must be maintained in good operation condition during the period of use.
Note.
If the line is too short you may not be able to advance the line by
tapping it on the ground. If this is the case, stop the engine and manually
advance the line.
5
Instructions
