background image

1800 909 909 

www.powertoolsupport.com      email: [email protected]  11/2015

AFTER SALES SUPPORT 

50714

9

•  Never fill fuel tank indoors. Never fill fuel tank when engine is running or hot. 

 

Do not smoke when filling fuel tank.

•  Stop the engine before re-fuelling.
•  Stop the engine and disconnect the spark plug wire:

–  If the blower vac vac starts to vibrate abnormally (find and remove the cause of 

the vibration immediately).

•  Reduce the throttle before turning off the engine and turn the fuel off when you 

have finished blowing or vacuuming.

•  The user is responsible for the safety of other people, animals and objects in the 

working area. Keep children and domestic animals at a safe distance while the 
blower vac is in use.

Unpacking

Due to modern mass production techniques, it is unlikely that your petrol blower 
vac is faulty or that a part is missing. If you find anything wrong, do not operate 
the tool until the parts have been replaced or the fault has been rectified. Failure 
to do so could result in serious personal injury. 

Contents of carton

  1 x 26cc Blower Vac 
  1 x Lower Blow Tube
  1 x Blow Tube Nozzle 
  4 x Tube Assembly Screws 
  2 x Toolfree blower lock knobs (fitted) 
  1 x Toolfree vacuum lock knob (fitted)
  1 x Instruction Manual 
  1 x Quick Start Guide
  1 x 35L Collection Bag with Shoulder Strap
  1 x Lower Vac Tube
  1 x Vac Tube Nozzle
  1 x Fuel Mixing Bottle
  1 x Spark Plug Wrench
  1 x Warranty Card & Details

General Information & Safety Instructions

2

Содержание 50714

























Отзывы: