VI. Install the battery and open the package of
accessories (7): Starting handle of mower, one
battery
VII. Installation completed
V. Install the auxiliary handle of mower and open
the package of accessories (6); One set of mower
auxiliary handle, four fixed screws/nuts, one
hexagon wrench
1
）
Hold the clips on both sides of the battery, see
Figure
①
;
2
）
Align the battery slot buckle and push hard in.
The sound means successful installation, see
Figure
②
;
3
）
Remove the battery, hold the buckle on both
sides of the battery, pull it out of the slot and pull
out the battery.
VIII. Startup test
1
）
The starting handle includes the red round
self-lock knob and the red long-shaped start
trigger, and the red round self-lock knob is the
fuse button;.
2
）
The mower starts when pressing the fuse button
before pulling the trigger, see Figure
①
;
3
）
After startup, release the round fuse button. Press
the red long-shaped start trigger to maintain
working; release the trigger to stop working, see
Figure
②
;
4
）
Repeat these steps 2) 3) to continue working.
1）
Adjust the installation position by itself according
to the height;
2）
Open the rubber shock absorption sleeve of
handle, see Figure
①
;
3）
Install the lower base of auxiliary handle, and pull
the upper and lower bases on the rubber shock
absorption cover to make the screw holes
aligned, see Figure
②
;
4）
Place the screws in the four holes and hold the
upper and lower bases, see Figure
③
;
5）
Tighten screws with a hexagon wrench (prevent
from screwing off), see Figure
④
;
1
2
3
4
1
2
1
2
5
2
1
4
3
