3.16.2.4 Exit angles > Sectors
The robotic lawnmower can be set for 1 or 2 exit
sectors. If the charging station is placed in a passage, 2
exit angles, for instance 70° - 110° and 250° - 290°, can
be used.
When 2 exit angles are used, there is a need to also
specify how often the robotic lawnmower must leave the
charging station in
Sector 1. This is done using the
Proportion function by initially specifying a percentage.
For instance the percentage of 75 % means that the
robotic lawnmower leaves the charging station in
Sector
1 on 75% of the times and 25% of the times in Sector 2.
Use the number keys to specify the required angles in
degrees for the sectors and proportion as a percentage.
3.16.2.5 Reversing distance
This functions allows you to control how far the robotic
lawnmower has to reverse out from the charging station
before it starts mowing. This is a useful function for
instance if the charging station is placed way in under a
veranda or in another limited space area.
Use the number keys to specify the required reverse
distance in centimetres. The factory setting is 60 cm.
3.16.2.6 Drive past wire
The front of the robotic lawnmower always passes the
boundary wire by a specific distance before the mower
turns around. The default distance is 32 cm, but this can
be changed if required. A figure between 25 and 40 can
be selected.
Note that the distance given is only an approximate
value and should be regarded as a guide. In reality, the
actual distance the robotic mower passes the boundary
wire can vary.
Specify the number of centimetres you want the robotic
lawnmower to pass the boundary wire and press OK.
3.17 Settings
This selection allows you to carry out changes to the
robotic lawnmower’s general settings.
SETTINGS
General
ECO mode
3.17.1 ECO mode
This function automatically turns off the signal in the
boundary loop, the guide wires and the charging station
when the robotic lawnmower is not mowing, i.e. when
the lawnmower is charging or is not allowed to mow due
to timer settings.
ECO mode
Use ECO mode
ECO mode is suitable to use where there is other
wireless equipment not compatible with the robotic
lawnmower e.g. certain hearing loops or garage doors.
When
ECO mode is activated, the indicator lamp in the
charging station flashes green.
ECO mode means that
the robotic lawnmower can only be started in the
charging station and not out in the working area.
In
ECO mode, it is very important to always press the
STOP button before removing the robotic lawnmower
from the charging station. It is otherwise not possible to
start the robotic lawnmower. If the lawnmower has been
removed by mistake without first pressing theSTOP
button, the lawnmower must be placed back in the
charging station and the STOP button pressed. Only
then can the robotic lawnmower be started inside the
working area.
Select
ECO mode and press OK to activate ECO mode.
Note: Always press the STOP button before removing
the robotic lawnmower from the charging station. In
ECO mode the robotic lawnmower otherwise can not be
started inside the working area.
3.17.2 General
Set language and time or reset user settings to factory
default.
General
Time & date
Language
Country
Reset all user settings
About
3.17.2.1 Time & Date
This function allows you to set current time and date and
required formats.
307 - 002 - 11.10.2017
Installation - 29
