To disable mowing a whole day, uncheck both periods.
3.12.5 Copy
Use this function to copy the current day settings to
other days.
Mark
Copy by using arrow keys and press OK. Then use
the up and down arrow keys to move the cursor
between days. The times will be copied to the days that
are marked with OK.
3.12.6 Reset
This function resets the timer to the factory setting,
where the robotic lawnmower is allowed to operate 24
hours a day every day.
Reset timer
Current day
All week
3.12.6.1 Current day
This resets the day that is selected in the tab system.
The factory setting is that the robotic lawnmower is
allowed to operate 24 hours a day.
3.12.6.2 All week
This resets all days in the week.
The factory setting is that the robotic lawnmower is
allowed to operate 24 hours a day every day.
3.13 SensorControl
Only for R130Li, R130LiC, R160Li and R160LiC
SENSORCONTROL
On/Off
Cutting time
This function allows the robotic lawnmower to
automatically adjust its mowing times based on how
quickly the lawn grows. When the weather is good for
grass growth, the robotic lawnmower mowes more often
and when the grass growth is slower the robotic
lawnmower will automatically spend less time on the
lawn. The first mowing cycle of the day will however
always be completed. After that, SensorControl will
decide whether to continue or not.
For optimal SensorControl performance, it is
recommended to only deselect the times when the
robotic lawnmower must not operate. All other time
should be made available for the SensorControl. Manual
timer settings always have priority over SensorControl
so the robotic lawnmower will not be allowed to mow
more than the timer settings.
When the SensorControl is activated, the robotic
lawnmower needs time to decide what the optimal
mowing time is for the working area in question. For this
reason it can take a couple of days of calibration before
the mowing results are optimal.
Please, note that SensorControl is reset if the mower
has been shut down for more than 50 hours or if a
Reset
of all user setting is done. SensorControl is not affected
if a reset of timer setting is done.
When the SensorControl is activated, it is very important
to regularly check that the blade disc is clean and that
the blades are in good condition. Any grass twisted
around the blade disc shaft or blunt blades can affect
how the SensorControl functions.
3.13.1 SensorControl On/Off
To activate SensorControl: check the box by pressing
OK.
3.13.2 Cutting time
There are 3 cutting levels to choose from.
Cutting time
Low
Medium
High
If the mowing results are not optimal when using the
SensorControl, Cutting time settings may need
adjusting.
3.13.2.1 To adjust the cutting time
1. Place the cursor by
Cutting time and press OK.
2. Use the right and left arrow keys to increase or
decrease the cutting time in 3 preset intervals.
3.14 Smart System
Only for R100LiC, R130LiC and R160LiC
24 - Installation
307 - 002 - 11.10.2017
