4 Operation
4.1 Main switch
WARNING: Read the safety instructions
carefully before you start your robotic
lawnmower.
WARNING: Keep your hands and feet away
from the rotating blades. Never put your hands
or feet close to or under the body when the
motor is running.
WARNING: Never use the robotic lawnmower
when persons, especially children, or pets, are
in the cutting area.
•
Set the main switch in the
1 position to start the
robotic lawnmower.
•
Set the main switch in the
0 position when the
robotic lawnmower is not in use or if any work,
inspection or maintenance is being carried out.
When the main switch is set in the
0 position the
motors on the robotic lawnmower cannot start.
4.2 Start
1. Press the STOP button to open the hatch.
2. Set the main switch to position
1.
3. Enter the PIN code.
4. Press the START button.
5. Select the desired operating mode. See
6. Close the hatch within 10 seconds.
If the robotic lawnmower is parked in the charging
station, it will only leave the charging station when
the battery is fully charged and if the timer is set to
allow the mower to operate.
Note: Always press the START button before closing the
hatch to start the robotic lawnmower.
4.3 Operating mode - Start
When the START button has been pressed the following
operation selections can be selected.
•
Main area
•
Secondary area
•
Override timer
4.3.1 Main area
Main area is the standard operating mode where the
robotic lawnmower mows and charges automatically.
4.3.2 Secondary area
When mowing secondary areas
Secondary area setting
must be used. Selecting
Secondary area will cause the
robotic lawnmower to mow until the battery is empty.
If the robotic lawnmower charges in the
Secondary area
mode, it will fully charge, drive out about 50 cm and then
stop. This indicates that it is charged and ready to start
mowing.
If the main working area has to be cut after charging, it
is appropriate to switch the operation selection to
Main
area before placing the robotic lawnmower in the
charging station.
4.3.3 Override timer
Any timer settings can be temporarily overridden by
selecting
Override timer. It is possible to override the
timer for 24 h or 3 days.
4.4 Operating mode Park
When the PARK button is pressed the following
operation selections can be chosen.
4.4.1 Park until further notice
The robotic lawnmower stays in the charging station
until another operating mode is selected by pressing the
START button.
307 - 002 - 11.10.2017
Operation - 37
