Gardena R38Li, Руководство оператора

Страница: 35 / 56

4.4 Stop
1. Press the STOP button.
The robotic lawnmower stops, the blade motor stops
and the hatch opens.
4.5 Switch off
1. Press the STOP button.
2. Set the main switch to position
0.
Always switch the robotic lawnmower off using the main
switch if it requires maintenance or if the robotic
lawnmower must be moved outside the working area.
4.6 Timer and Standby
Use the timer function (see
Timer on page 21 ) to avoid
a downtrodden lawn.
4.6.1 Standby
The robotic lawnmower has an inbuilt standby period
according to the Standby time table. The standby period
provides for instance a good opportunity to water or play
games on the lawn.
Model Standby time, minimum hours
per day
GARDENA R38Li 12
GARDENA R40Li 12
GARDENA R45Li 12
GARDENA R50Li 12
GARDENA R70Li 8
GARDENA R80Li 8
4.6.2 To set the timer
When setting the timer, calculate that the robotic
lawnmower mows about the amount of the number of
square meters per hour and day listed in table Work
capacity.
Model Approximate work capacity,
m
2
per hour and day
GARDENA R38Li 43
GARDENA R40Li 33
GARDENA R45Li 38
GARDENA R50Li 42
GARDENA R70Li 44
GARDENA R80Li 50
If the working area is for example 360 m
2
in size, R70Li
must operate for 8 hours a day. The times are
approximate and depend for instance on grass quality,
blade sharpness and battery age.
WARNING: Use the timer to avoid mowing
when there are usually children, pets and
anything else that could be damaged by the
rotating blades on the lawn.
The factory setting for the timer is 07:00 - 22:00 for
GARDENA R38Li, R40Li, R45Li, R50Li and 07:00 -
23:00 for GARDENA R70Li, R80Li. It allows mowing
every day of the week. However, the robotic lawnmower
will not operate during the built-in standby period.
4.6.3 Example 1
The times used in this example are applicable to
GARDENA R40Li, but the principle is the same for other
models.
Timer setting,
Period 1: 07:00 - 22:00
Active period (A): 07:00 - 19:00
The factory setting ensures that the robotic lawnmower
begins cutting the lawn at 07:00. However the mower is
parked in standby mode in the charging station from
19:00 and rests until it starts cutting again at 07:00.
If the timer setting is divided into 2 work periods, the
standby period can be divided into a number of periods.
The minimum standby period time must however be
according to the Standby time table.
24 h
A B
Sta
nd
by
Mo
w
in
g
C
ha
rg
in
g
O
pe
ra
tio
n
303 - 001 - 21.09.2017 Operation - 35