GARDENA R80Li
Work area
Work days per week
Work hours per day
Suggested time interval
100 m
2
5
3
07:00 - 10:00
7
2
07:00 - 09:00
200 m
2
5
5.5
07:00 - 12:30
7
4
07:00 - 11:00
400 m
2
5
11.5
07:00 - 18:30
7
8
07:00 - 15:00
600 m
2
6
14
07:00 - 21:00
7
12
07:00 - 19:00
800 m
2
7
16
07:00 - 23:00
3.13.2 To set the timer
•
Work hours 1: To set start and stop times for Work
hours 1, enter each required time in hours and
minutes and press
OK to confirm the entered time.
•
Work hours 2: To set start and stop times for Work
hours 2, enter each required time in hours and
minutes and press
OK to confirm the entered time.
•
Work days: To select the days the robotic
lawnmower must work, tick off the days the robotic
lawnmower will work
•
Reset timer: To reset values to the factory settings,
select the
Reset timer and press OK.
To inactivate
Work hours 1 or Work hours 2, enter the
time 00:00 - 00:00 to reset the timer to --:-- - --:--.
A clock symbol is displayed on the start page when the
timer settings are set. The clock symbol is black when
the robotic lawnmower is not allowed to mow due to a
timer setting.
3.14 Installation, R70Li/R80Li
For many working areas there is no need to change the
factory settings but sometimes, depending on the lawn
complexity, the mowing result can be improved by
making manual settings.
INSTALLATION
Remote start 1
Remote start 2
Guide width
Test settings
Drive past wire
The following operating settings are available via this
selection in the main menu.
•
Guide width: To select the distance from the guide
wire the mower is allowed to travel when it follows
this to and from the charging staiton.
•
Remote start 1: To control the robotic lawnmower so
that it can easier reach remote parts of the garden.
•
Remote start 2: To control the robotic lawnmower so
that it can easier reach remote parts of the garden.
•
Test settings: To check the above settings.
•
Drive past wire: To set the distance over the
boundary wire that the robotic lawnmower should
travel before turning back.
For examples of installation settings, see
Yard layout
examples on page 31.
3.14.1 Guide width
The guide width is a measure of how far from the guide
wire the robotic lawnmower is allowed to travel when it
follows this to and from the charging station. The area
beside the wire which the robotic lawnmower uses is
called the Corridor.
The robotic lawnmower has a default setting for
Medium
wide corridors. To further reduce the risk of tracks
forming, it is recommended to select as wide corridor as
possible. The
Narrow corridor setting is not normally
recommended, but in a garden with one or many narrow
passages, a narrow corridor may be the only option. The
Narrow corridor setting increases the risk for tracks
forming along the guide.
3.14.2 Remote start 1
One important function with the guide wire is the
possibility to steer the robotic lawnmower to remote
garden areas when required. This function is very useful
in gardens where, for instance, the front and back are
joined by a narrow passage.
Remote start 1
Proportion
Distance
3.14.2.1 Proportion
With this function activated, (any option other than
Never is selected) the robotic lawnmower will at times
follow the guide wire from the charging station to the
remote area and begin mowing there.
24 - Installation
303 - 001 - 21.09.2017
