![background image](http://html1.mh-extra.com/html/gardena/classiccut-li/classiccut-li_operators-manual_3737327006.webp)
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adap
tor plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk
of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet con
ditions. Water entering a power tool will increase the
risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk
of electric shock.
f) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply.
Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or medica
tion. A moment of inattention while operating power
tools may result in serious personal injury.
b) Use personal protective equipment. Always wear
eye protection.
Protective equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch
is in the offposition before connecting to power
source and / or battery pack, picking up or carry
ing the tool. Carrying power tools with your finger on
the switch or energising power tools that have the
switch on invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on.
A wrench or a key left attached to a rotating part of
the power tools may result in personal injury.
e) Do not overreach. Keep proper footing and bal
ance at all times. This enables better control of the
power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery
or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used.
Use of dust collection can reduce dust-related hazards.
6
EN
9856-39.960.02.indb 6
9856-39.960.02.indb 6
23.04.21 08:51
23.04.21 08:51
Содержание ClassicCut Li
Страница 51: ...1 1 a 51 ZH 9856 39 960 02 indb 51 9856 39 960 02 indb 51 23 04 21 08 51 23 04 21 08 51...
Страница 53: ...g 4 a b c d e f g 5 a b c d 6 53 ZH 9856 39 960 02 indb 53 9856 39 960 02 indb 53 23 04 21 08 51 23 04 21 08 51...
Страница 56: ...45 C 25 C GARDENA 56 ZH 9856 39 960 02 indb 56 9856 39 960 02 indb 56 23 04 21 08 51 23 04 21 08 51...