14
GB
Fitting the front handle :
3
2
1
2
3
A
0
Charging the battery :
4
5
6
3. Assembly
DANGER ! Risk of physical injury !
A
Cutting injuries can be caused if the hedge trimmer
does switch on unintentionally.
V
Remove the battery before assembling the
hedge trimmer (see 4. Operation) and slide the
protective cover
0
over the cutter blade.
ATTENTION ! Safety guard !
A
The guide handle
1
is only a safety guard for the
2-handed trigger when the spring
z
S
is correctly
inserted.
1. Insert the wide side of the
spring
z
S
into the lower
casing
z
a
and the lower side
into the upper casing
b
and
close the guide handle
1
.
2. Push the guide handle
1
over
the slot in the hedge trimmer
and ensure it is fully in place
and the handle hole
2
is lined
up with the threaded hole
2
.
3. Secure the guide handle
1
to the
hedge trimmer using the two screws
3
.
4. Initial Operation
WARNING !
A
Overvoltage damages batteries and the battery
charger.
V
Ensure the correct mains voltage.
Before using for the first time, the battery must be fully charged.
Charging time (for uncharged battery) see 10. Technical Data.
The lithium-ion battery can be charged in any state of charge,
and the charging process can be interrupted at any time without
harming the battery (no memory effect).
So that the fully charged battery is not discharged, the battery
should be disconnected from the battery charger.
1. Press the locking buttons in
4
and remove the battery
5
from
the handle
6
.
2. Plug the plug of the charger cable
7
into the battery
5
.
3. Plug battery charger
8
into a mains socket.
a
z
S
b
