Gardena 15001-26 Скачать руководство пользователя страница 30

Страница: 30 / 56

4 Operation

4.1 The ON/OFF button

WARNING:

Read the safety

instructions carefully before you start the

product.

WARNING:

Keep your hands and feet

away from the rotating blades. Do not put

your hands or feet close to or under the

machine when the blade motor is running.

WARNING:

Do not use the product

when persons, especially children, or

animals are in the work area.

•

Push the ON/OFF button for 3 seconds to switch

on the product. The product is active when the

indicator lamp on the keypad is lit.

•

Push the ON/OFF button for 3 seconds to switch

off the product.

•

The product is in power save mode if the indicator

lamp flashes. Push the ON/OFF button for 3

seconds to switch on the product.

4.1.1 The indicator lamp

WARNING:

It is only safe to carry out

inspection or maintenance on the product

when the product is disabled. The product is

disabled when the lamp on the keypad is not

lit.

The indicator lamp on the keypad is an important status

indicator:
•

The product is active if the indicator lamp lights

continuously.

•

The product is in power save mode if the indicator

lamp flashes. Push the ON/OFF button for 3

seconds to make the product active again.

•

The product is disabled when the indicator lamp is

not lit.

4.2 To start the product

Open the hatch to the keypad.

Push the ON/OFF button for 3 seconds. The

display is lit up.

Use the up/down arrow buttons and the OK button

to enter the PIN code.

Select the desired operating mode and confirm

with the OK button. Refer to

Operating modes on

page 30

Close the hatch.

Note:

The first weeks after installation the perceived

sound level when cutting the grass may be higher than

expected. When the product has cut the grass for some

time, the perceived sound level is much lower.

4.3 Operating modes

Push the Mode button to select the following operating

modes:
•

Main area

•

Secondary area

•

Park

•

Park / Schedule

•

Override schedule

•

Spot cutting

30 - Operation

1298 - 007 - 16.09.2020

Содержание 15001-26

























































Результаты поиска

Содержание 15001-26

Отзывы:

Похожие инструкции для 15001-26

Бренды по названию

Популярные бренды

Gardena 15001-26, Руководство оператора

Результаты поиска

Содержание 15001-26

Отзывы:

Похожие инструкции для 15001-26

Бренды по названию

Популярные бренды