Gardena 15001-26 Скачать руководство пользователя страница 29

Страница: 29 / 56

app. The following settings are blocked in the menu

selection of the smart product:
•

Schedule

•

Time & Date

•

Language

•

Country

3.10.13.1 To set the Activate Inclusion Mode
In order to include your smart product into the

GARDENA smart system app:
1.

Do steps 1–3 in

To get access to the menu on

page 23

Use the arrow buttons and the OK button to enter

the menu

smart system

Use the right arrow button and the OK button to

select

Yes

Activate Inclusion Mode

Use the up/down arrow buttons to enter the PIN

code and push the OK button.

The inclusion code is shown in the product display.

Follow the instructions in the GARDENA smart

system app.

The inclusion sequence might take several minutes.

Once the inclusion has succeeded you will automatically

return to the product start screen. If the inclusion by any

reason fails, try again.

3.10.13.2 Inclusion in the App
The inclusion of all GARDENA smart devices takes

place over the smart system app.
To download the GARDENA smart system app
1.

Download the GARDENA smart system app from

App Store or Google Play.

Open the app and register as a user.

Include device

from the start

page in the app.

Follow the instructions in the app.

Note:

The smart gateway needs internet connection

to be able to include the product to the app.

3.10.13.3 To select Exclude device
If you exclude the device, there will be no

communication between the product and the GARDENA

smart system.
1.

Do steps 1–3 in

To get access to the menu on

page 23

Use the arrow buttons and the OK button to move

through the menu structure

smart system >

Exclude device

Push the OK button.

Note:

The product must be manually deleted from the

list of products in the GARDENA smart system app.

3.10.13.4 To do a check of the status for GARDENA

smart system
When the product is connected to smart system

gateway, you can do a check of the connection status.
1.

Do steps 1–3 in

To get access to the menu on

page 23

Use the arrow buttons and the OK button to move

through the menu structure

smart system > Status

Note:

The

Status

is either connected

Yes

or not

connected

. The

Signal strength

is either

Good, Poor

Bad

. Put the charging station in a location with

Signal

strength - Good

, for the best smart system performance.

1298 - 007 - 16.09.2020

Installation - 29

Содержание 15001-26

























































Результаты поиска

Содержание 15001-26

Отзывы:

Похожие инструкции для 15001-26

Бренды по названию

Популярные бренды

Gardena 15001-26, Руководство оператора

Результаты поиска

Содержание 15001-26

Отзывы:

Похожие инструкции для 15001-26

Бренды по названию

Популярные бренды