Gardena 15001-26, Руководство оператора

Страница: 28 / 56

3.10.11 Frost Sensor
The grass is extra sensitive to wear if the yard is
covered with frost. If the Frost Sensor is activated, the
product is not allowed to start to cut the grass if the
temperature is below 5° C / 41° F.
Note:
The frost sensor is located inside the chassis
and there can be a delay compared to the ambient
temperature.
3.10.11.1 To set the Frost Sensor
1.
Do steps 1–3 in To get access to the menu on
page 23
.
2. Use the arrow buttons and the OK button to move
through the menu structure Settings > Installation
> Frost Sensor
.
3. Push the OK button to select Frost Sensor .
4. Push the BACK button.
3.10.12 General
In
General
you can change the general settings of the
product.
3.10.12.1 To set the time & date
1.
Do steps 1–3 in
To get access to the menu on
page 23 .
2. Use the arrow buttons and the OK button to move
through the menu structure
Settings > General >
Time & Date .
3. Use the arrow buttons to set the time and then
push the BACK button.
4. Use the arrow buttons to set the date and then
push the BACK button.
5. Use the arrow buttons to set the time format and
then push the BACK button.
6. Use the arrow buttons to set the date format and
then push the BACK button.
3.10.12.2 To set the language
1.
Do steps 1–3 in
To get access to the menu on
page 23 .
2. Use the arrow buttons and the OK button to move
through the menu structure
Settings > General >
Language.
3. Use the arrow buttons to select language and then
push the BACK button.
3.10.12.3 To set the country
1.
Do steps 1–3 in To get access to the menu on
page 23
.
2. Use the arrow buttons and the OK button to move
through the menu structure
Settings > General >
Country.
3. Use the arrow buttons to select country and then
push the BACK button.
3.10.12.4 To set the unit format
1.
Do steps 1–3 in To get access to the menu on
page 23
.
2. Use the arrow buttons and the OK button to move
through the menu structure Settings > General >
Unit format.
3. Use the arrow buttons to select unit format and
then push the BACK button.
3.10.12.5 To reset all user settings
1.
Do steps 1–3 in
To get access to the menu on
page 23
.
2. Use the arrow buttons and the OK button to move
through the menu structure Settings > General >
Reset all user settings
.
3. Use the right arrow button to select
Proceed with
reset of all user settings?
4. Push the OK button to reset all the user settings.
Note:
Security level, PIN code, Loop signal,
Messages, Date & Time, Language
and
Country
settings are not reset.
3.10.12.6 The About menu
The
About menu displays information about the product,
for example serial number and firmware versions.
3.10.13 GARDENA smart system
Only for smart SILENO city and smart SILENO life.
Note:
Make sure that the smart product is fully
installed in the work area before you include it into the
GARDENA smart system app. Refer to
Installation on
page 14 .
The product can connect to mobile devices that have the
GARDENA smart system app installed. The GARDENA
smart system makes it possible with wireless interaction
between your smart product and the GARDENA smart
system.
In the smart system menu in the product you can:
•
enable your smart product to include with or
exclude from the GARDENA smart system app.
• check the status of the wireless connection to the
smart system.
When the smart product is part of the smart system,
some menus in the product display are disabled. You
can still see all of the settings in the product but some
can only be changed with the GARDENA smart system
28 - Installation 1298 - 007 - 16.09.2020