RC1xx LED Lighting Controllers - User Manual
—
23
—
When the RC1xx is not being configured, the display shows the status of
the lighting output as shown below:
The RC1xx displays an error if a light is connected but no rating specified.
To configure the RC1xx from the front panel, press and hold
SEL
for 1
second.
CH1
is displayed. You can then use the
and
keys to scroll
through the menu, pressing the
SEL
button to access the required set up
as shown in the table below:
Display
Select to:
CH1
To set up an output channel.
Eth
Set up Ethernet access.
LOC
Set up a key lock.
tES
Factory test. Do not use.
FrE
Set up the internal trigger.
trg
View the trigger status.
UAL
View the output current.
rAt
Set the lighting rating.
