Ganz ZN-PT series, Руководство по установке

Страница: 29 / 43

Installation Guide
23
Tools Needed:
•
Tool for drilling
•
Tool for screwing
Follow the steps below to mount the Dome Camera with the Standard
Pendent Mount.
1) Make a cable entry hole on the wall to recess the cables. Otherwise, users
could push up the cable entry board on the Standard Pendent Mount’s
mounting plate to place the cables (see the illustration in section 4.4.2
Compact Pendent Mount > Step 1).
2) Fix the Standard Pendent Mount on the wall with proper screws and screw
anchors.
3) Attach the Waterproof Rubber to the Standard Pendent Mount.
4) Run the cable(s) through the Standard Pendent Mount with the Data
Cable’s 22-pin cable coming out of the outlet.
NOTE: Please block the cable entry hole with the supplied sponge
to avoid insects entering the Pendent Mount. See the illustrations
in section 4.4.2 Compact Pendent Mount > Step 4.
5) Thread the cable(s) through the Outdoor Mount Kit and join the Outdoor
Mount Kit to the Standard Pendent Mount with the supplied screws and
washers. Then adjust the Waterproof Rubber to the joint.
6) Connect the cable(s) to the Dome Camera.
7) Join the Dome Camera to the Outdoor Mount Kit with the supplied M5
screw and washers.
Wall Mounting: Standard Pendent Mount + Outdoor Mount Kit