Ganz ZN-PT series, Руководство по установке

Страница: 10 / 43

Installation Guide
4
STEP 4
Attach the dome cover to the camera
body. Before doing that, apply some
lubricant on the cover’s water-proof
rubber to make the installation process
smoother.
Note that the tiny protrusion on the cover
must align with one of the four holes on
the camera body.
STEP 5
Gently press down the dome cover with
two hands on the side of it.
DO NOT press the cover, as shown in the
figure; this might cause damage to the
Dome Camera.
STEP 6
Screw the dome cover and camera body
together.
STEP 7
Set the switches located on the bottom of
the Dome Camera. Refer to section 3.2
Dome Camera Setups for detailed
information about various switch setting.