Ganz ZN-PT series, Руководство по установке

Страница: 34 / 43

Installation Guide
28
4.5.2 Corner Thin/Wide Box Mounting
Package Contents:
•
M8x16 Screw x4
•
Washer-8 x4
•
Spring Washer-8 x4
Items Needed:
•
Dome Camera
•
Outdoor Mount Kit (supplied)
•
Data Cable (supplied)
•
Ethernet Cable (network Speed Dome Camera)
•
Standard/ Compact Pendent Mount and equipped items (optional
accessory)
•
Corner Thin/Wide Box (optional accessory)
•
Waterproof Rubber (supplied)
•
M5 Standard/Security Screw (supplied)
•
Screws and Screw Anchors for fixing the Corner Thin/Wide Box (not
supplied)
Tools Needed:
•
Tool for drilling
•
Tool for screwing
Follow the steps below to mount the Dome Camera with the Corner
Thin/Wide Box and Standard/ Compact Pendent Mount.
1) Make a cable entry hole on the wall to recess the cable(s).
2) Fix the Corner Thin/Wide Box on the corner of the wall with proper screws
and screw anchors. Then run the cable(s) through the hole on the Corner
Mounting Plate with the Data Cable’s 22-pin cable coming out.
3) Fasten the Standard/ Compact Pendent Mount onto the Corner Thin/Wide
Box with the supplied screws and washers. Then thread the cable(s)
through the Standard/ Compact Pendent Mount with the cable(s) coming
out of the Pendent Mount’s outlet.
NOTE: Please block the cable entry hole with the supplied sponge
to avoid insects entering the Pendent Mount. See the illustrations
in section 4.4.2 Compact Pendent Mount > Step 4.