Ganz ZN-DT350VE, Руководство управления OSD-меню

Страница: 18 / 38

ZN ‐ DT350VE/ZN ‐ DNT350VE/ZN ‐ DWNT350VE OSD Menu Control Manual
2010/2 ‐ 1 03A.00 18
NOTE :
• When using AC power at a 60Hz frequency Line ‐ Lock synchronization can be used.
• When the power is DC 12V, the SYNC. menu is fixed to the 'INT' mode.
●
MOTION DET:
This camera displays an on ‐ screen message whenever motion is detected.
①
When the SPECIAL menu screen is displayed, press the Up and Down buttons so that the
cursor points to MOTION DET.
②
Set up the function using the 4 directional buttons.
‐ SENSITIVITY : Select up to eight MD areas. When the SENSITIVITY value is high, motion
detection sensitivity is increased to recognize small movements.
‐ AREA MODE : Determines whether to use the MD area selected in SENSITIVITY.
‐ SEL POS : Determines which of the 4 vertices of each MD area is to be used.
‐ YPOS : Determines the co ‐ ordinates of the vertical axis for SEL POS.
‐ XPOS : Determines the co ‐ ordinates of the horizontal axis for SEL POS.
‐ FILL
→
SET : Fills in a selected MD area. Fill in a selected MD area. The color of filling is
sequentially selected as brown, orange, blue, cyan, yellowish green, yellow and red.
‐ RETURN : Select this to save the MOTION DET menu settings and return to the SPECIAL menu.
NOTE :
• MD areas show only on the MOTION DET menu. Therefore, MD areas are not displayed on
the monitor screen.
●
PRIVACY : Hide an area so that it is not displayed on the monitor.