Ganz ZN-DT350VE, Руководство управления OSD-меню

Страница: 35 / 38

ZN ‐ DT350VE/ZN ‐ DNT350VE/ZN ‐ DWNT350VE OSD Menu Control Manual
2010/2 ‐ 1 03A.00 35
‐ AUTO : This camera has a function which automatically changes to the appropriate mode for
daytime or night ‐ time. The COLOR mod is operated for daytime, and it converts to BW mode
for night ‐ time.
‐ ON : The color mode is selected by default, and the modes do not change automatically.
NOTE :
•
When the AGC is turned off, COLOR does not operate.
•
When an infrared light is used, there may be a problem with focusing.
●
SYNC : Two of synchronization modes are available Internal and External line ‐ lock mode, it
synchronizes the video signal between cameras without a synchronous generator. The line ‐
lock synchronization is only used In the areas of 60Hz and 50Hz.
‐
INT : Internal Synchronization Type
‐ L/L : Power Synchronization Type, Line ‐ lock
• Press the SET button.
• Select a phase between 0 and 359.
NOTE :
• When using AC power at a 60Hz frequency Line ‐ Lock synchronization can be used.
• When the power is DC 12V, the SYNC. menu is fixed to the 'INT' mode.
●
MOTION DETECTION
It allows you to observe movements of objects in 4 different areas on the screen, and the
words ‘MOTION DETECTED’ appear on the screen when movement is detected; hence a single
individual can conduct supervision efficiently. The camera detects an object’s movement by
sensing disparity of outline, and level of brightness and color.
1. Press the SETUP button.
OFF : Motion detection mode is cancelled.
ON : Any motion in the selected area is observed.
2. Select the area you want to observe from the 4 areas in AREA SEL mode.
3. Select ON mode for the chosen area.
4. Adjust the size of the area to be observed by using the UP, DOWN, LEFT or RIGHT
button.