Ganz ZN-D2024, Руководство пользователя

Страница: 31 / 59

- 30 -
Network settings
Any changes made on the Network type section will restart the system in order to
validate the changes. Make sure every field is entered correctly before clicking on
.
Network type
“LAN” & “PPPoE”
The default type is LAN. Select PPPoE if using ADSL
"Get IP address automatically" & “Use fixed IP address”
The default status is “Get IP address automatically”. This can be tedious having to
perform software installation whenever the IP Camera starts. Therefore, once the
network settings, especially the IP address, have been entered correctly, select “Use
fixed IP address” then the IP Camera will skip installation at the next boot. The IP
Camera can automatically restart and operate normally after a power outage. Users
can run IP installer to check the IP address assigned to the IP Camera if the IP address
is forgotten or using the UPnP function provided by the IP Camera (MS Windows XP
provides UPnP function at My Network Place). “IP address” This is necessary for
network identification.
“Subnet mask” This is used to determine if the destination is in the same subnet. The
default value is “255.255.255.0”.
“Default router” This is the gateway used to forward frames to destinations in a
different subnet. Invalid router setting will fail the transmission to destinations in
different subnet.
“Primary DNS” The primary domain name server that translates hostnames into IP
addresses.
“Secondary DNS” Secondary domain name server that backups the Primary DNS.
“Primary WINS server” The primary WINS server that maintains the database of
computer name and IP address.
“Secondary WINS server” The secondary WINS server that maintains the database
of computer name and IP address.
“PPPoE” If using the PPPoE interface, fill the following settings from ISP
“User name” The login name of PPPoE account