Ganz ZC-D5000NXA series, Инструкция по эксплуатации

Страница: 4 / 12

EG-4
PART NAMES
 Exterior
Body cover Inner cover
Surface mount cover
Camera body Dome cover Video relay cable

Accessories
Service monitor cable Adapter ring
M4 x 20 2 pcs.
Self-tapping screws
Removing and attaching the cover
• Dome cover
To remove : Pull the cover away.
To attach : Insert the cover and push it gently until you
hear a click.
• Body cover
To remove : Insert a flat-bladed screwdriver into the
groove between the camera body and the
body cover, then twist the screwdriver.
To attach : Align the corrugations on the camera body
and body cover, then push until you hear a click.
Flat-bladed
screwdriver
 Camera body interior
1
Lens
4
Menu Operation Switch
2
Focus/
View angle
adjustment lever
5
Video output connector
for service monitor
7
Termination
resistance switch (with
communication function)
8
B/W Fix terminal/Mode
Selection terminal
9
RS485 communication
terminal (with
communication function)
6
Video relay cable
3
Power input
terminal
1
Lens
2
∞
N : Focus adjustment lever
W T : View angle adjustment lever
Positioning of the lens body angle/focus adjustment lever varies depending on the lens. Please
refer to the above guides for operation marked on the side of the levers while using the product.
3
Power input terminal
4
Menu Operation Switch
5
Video output connector for service monitor
6
Video relay cable
7
Termination resistance switch (with communication function)
8
B/W Fix terminal/Mode Selection terminal
9
RS485 communication terminal (with communication function)