GAT NET.Controller 7000
Control unit for the GAT NET.Lock 7000
Application
The GAT NET.Controller M 7000 (master controller) and S 7000 (slave
controller) control units are used to connect and control the GAT NET.
Lock 7000 electronic locker locks from GANTNER.
The control units operate in online mode and communicate with a host
PC/server. The GAT NET.Controller M 7000 master controller serves as
the communication bridge between the host PC/server and the GAT NET.
Controller S 7000 slave controllers.
For system flexibility, different slave controllers are available to suit the
leading RFID technologies (see order information).
Functional description
The correct type of slave controller must be used to suit the RFID technology
in operation. The slave controllers are connected to the master controllers
via a serial RS 485 interface. Each master controller can control up to 8
slave controllers and 192 locks over a maximum cable length of 200 m.
For smaller MIFARE
®
/ISO systems, a light version of the slave and master
controllers is available (see functionality table).
In online operation, the slave controllers receive data carrier information
via the connected locks. This information is sent via the master controller
to the PC/server for authorization. The current status of the locker system
is also forwarded to the PC/server, thereby allowing the status of each
locker to be visualized using, for example, GANTNER PC software. An
emergency mode function for online mode ensures operation continues if
communication to the PC/server is temporarily interrupted.
Highlights
• Connection of locks via industry-standard MOLEX plugs
• LED status display
• Simple configuration with GANTNER software tools
• Firmware update via host interface possible
• Diagnostic system for detecting lock problems
• Integration into alarm system (locker break-in alarm)
Accessories
Description
Part No.
GAT NET.Controller M 7000
Master controller for max. 8 GAT NET.Controller S 7000 slave
controllers
253224
GAT NET.Controller M 7000 Light
Master controller for max. 3 GAT NET.Controller S 7000 slave
controllers, no relays and no optocouplers
978541
GAT NET.Controller M 7000 Light ext.
GAT NET.Controller M 7000 Light extension license for max.
8 GAT NET.Controller S 7000 slave controllers
978440
GAT NET.Controller S 7000 F/ISO
MIFARE
®
/ISO 15693 slave control unit for max. 24 GAT
NET.Lock 7000 electronic locks
253426
GAT NET.Controller S 7000 F/ISO Light
MIFARE
®
/ISO 15693 slave control unit for max. 12 GAT
NET.Lock 7000 electronic locks
429730
GAT NET.Controller S 7000 B
LEGIC
®
slave controller for max. 24 GAT NET.Lock 7000
253325
GAT NET.Controller S 7000 ICLS
iCLASS
®
slave control unit for max. 24 GAT NET.Lock 7000
768538
1
www.gantner.com
Description
Part No.
GAT NET.Lock 7000
Electronic locker lock
368534
GAT NET.Lock Cable 5m
5 m connection cable for the GAT NET.Lock 7000, 4-pin
MOLEX plug on both ends
734430
GAT NET.Lock Cable Extension 3m
3 m extension cable for the GAT NET.Lock 7000
810021
GAT NET.Power Supply 230V
Power supply unit
369434
GAT NET.Power Cord xxx
Power cord for power supply unit. 494181 (EU), 494282
(UK), 511474 (AUS), 636835 (US), 636734 (IND)
See
description
GAT NET.Power Plug
Plug to forward the power supply
370426
GAT Patch Kabel 5805
5 m, shielded Ethernet patch cable with 8-pin RJ45 plugs
909321
Valid from September 15
th
2015 • Technical data subject to modification without notice!
DB_GAT-NETCONTROLLER7000--EN_23.indd • Part No.: 573835
GAT NET.Controller M 7000
GAT NET.Controller S 7000
Order information
Master
Standard
Master
Light
Slave
Standard
Slave
Light
Number of
relays
4
0
-
-
Number of
optocouplers
4
0
-
-
Max. no. of
slave units
8
3*
-
-
Max. no. of
NET.Locks
192
(via slaves)
36
(via slaves)
24
12
Controller functionality table (F/ISO)
*expandable to 8 with additional license (Part No. 978440)