Gantner GAT ECO.Side Lock 7010 F/ISO, Установка, настройка и эксплуатация

Страница: 49 / 64

GAT ECO.Side Lock 7010 (NW) F/ISO
Operation
www.gantner.com
HB_GAT-ECOSide-Lock7010-FISO--EN_11
49
6 OPERATION
6.1 General
The GAT ECO.Side Lock 7010 F/ISO can operate in "free locker" mode or "personal locker" mode. In free locker
mode, guests are allowed to choose any unoccupied locker they want to use. In personal locker mode, guests are
assigned a specific locker and only they have access to use the assigned locker.
When free lockers and personal lockers are used together in one system, it is recommended that the locker numbers
are unique for both functions. This means that the same locker number should not be used for both a personal locker
and a free locker.
6.2 Target Group
This chapter contains information for the technicians who commission the GAT ECO.Side Lock 7000 F/ISO and who
check it in case of operation problems.
6.3 Operating Modes
The GAT ECO.Side Lock 7010 F/ISO can function in one of the following operating modes:
-
Free locker (with or without duration of use function)
NOTE!
The duration of use function for Free Locker mode is only available for MIFARE systems.
- Free locker universal
- Free locker unique number
- Personal locker programming card
- Personal locker expiry date
Requirements for MIFARE and ISO 15693 data carriers
All MIFARE and ISO 15693 data carriers that are used in the system must meet the operating mode requirements as
specified in the following table.
Operating Mode Requirements for Data Carriers
Free locker Data carriers must be coded accordingly
Free locker universal
The locker sector must be unused (encoded with all zeros) and the access keys must be
correct
Free locker unique number All MIFARE and ISO 15693 data carriers are possible
Personal locker programming card All MIFARE and ISO 15693 data carriers are possible
Personal locker expiry date Data carrier must be coded accordingly
Table 6.1 - Requirements for data carriers