Gantner BENZIG M1, Руководство для ценителей

Страница: 68 / 82

BENZING M1 – Fancier
MENU FUNCTIONS
66
HB_BENZING-M1_ZUECHTER-EN_20-.doc
GANTNER Pigeon Systems GmbH
[ ] or [ ] - Move cursor mark to the desired setting
[ ] - Select the marked setting -> marker "O" will be set
(to
" ")
[
OK
] - Confirmation of the selection.
Only after this step the new
setting will be saved!
Notes: When set to "Deactivated", the Master/Slave Function will not be used. If "Master"
or "Slave" is selected, the BENZING M1 is set to the corresponding functionality.
When using two devices, always one of the devices has to be set to Master.
Master/Slave is used for example with multi-clock systems, where two clocks for two
different clubs are used in a fancier system.
Master/Slave does work also if two BENZING Stations are used.
5.4.9 Printer Settings
[
Settings
] -> [
Printer
]
To ensure correct functioning of the printer connected to the BENZING M1 system the
printer mode has to be set correctly. This setting is made in the fancier system and the club
independently from each other.
When selecting "Printer" in the Settings menu, the following PRINTER menu will be opened.
The possible settings are described below.