Auto power off:
After about 60sec. without
weight change
II.
Operation
o
Place the scale on a horizontal flat surface. Press [ON/OFF] key.
o
Wait until the LCD displays “0.00”.
o
Put the object(s) on the weighing platform.
o
Using the [MODE]-key to switch the weighing units.
III.
Tare Weighing
o
Turn on scale as described above.
o
Place the “tare item” on the platform.
o
Press the [Z/T] key and wait until “0.00” is displayed.
o
Add the “net-weight-item”.
IV.
Weighing units
o
Turn on scale as described above.
o
Press the [MODE] repeatedly to change the weight unit until the
required weight unit appears
V.
Counting Function
o
Press and hold the [C] key till display shows “PCS”. Press the
[MODE] key to select a reference amount (25, 50, 75 or 100 pcs)
o
Place a certain amount (25, 50, 75 or 100 pcs) of the item which
you want to weigh and count onto the platform. Press the [C] key
to active the counting function. The LCD will display “XX”, and the
reference value be confirmed. The counting function is ready!
o
With parts counting you can either count parts into a container
or remove parts from a container. As a rule: The higher the
reference quantity the higher the counting exactness
o
Now with pressing the [MODE] key to return the weight mode,
and press the [C] key to enter the counting mode.
