15
HEAT / COOL UNIT OPERATION
CHOICE ONE
HEAT/COOL
(OPTION 2 IN SERVICE MENU)
This will allow your Heat Pump to keep the temperature in your pool at the
same temperature, if the water temperature get 2˚ warmer or colder, the
unit will heat or cool the pool until it reaches the set point
Programming Instructions:
1.
Access the service menu by pressing and holding the
“UP” and
“DOWN” at the same time, until the screen changes to “REMOTE
TSTAT”
(Default “DISABLED”)
2.
Press the
“MODE” button until screen reads “POOL – HEAT/COOL”
(Default “DISABLED”)
3.
Press the
“UP” or “DOWN” to “ENABLE” this feature.
Operation Instructions:
1.
Press the
“MODE” button; The Display will read “POOL –
HEAT/COOL”
2.
Press the
“UP” or “DOWN” until screen reads “POOL TEMPERATURE
SETPOINT”
3.
Use the
“UP” or “DOWN” arrow until desired temperature is on
display.
4.
While still in the
“POOL TEMPERATURE SETPOINT” screen press the
“MODE” button to set the “DEADBAND” This will regulate how many
degree until the unit kicks on heat or cool.
(Default is 2˚)
CHOICE TWO
HEAT OR COOL
(OPTION 3 IN SERVICE MENU)
This will allow your Heat Pump to independently heat or cool your pool.
Programming Instructions:
1. Access the service menu by pressing and holding the
“UP” and
“DOWN” at the same time, until the screen changes to “REMOTE
TSTAT”
(Default “DISABLED”)
2.
Press the
“MODE” button until screen reads “POOL – COOL”
(Default
“DISABLED”)
3. Press the
“UP” or “DOWN” to “ENABLE” this feature.
Operation Instructions:
1. Press the
“MODE” button; The Display will read “POOL – COOL”
2. Press the
“UP” or “DOWN” until screen reads “POOL TEMPERATURE
SETPOINT” the unit will cool until it reaches this temperature.
