G&D TradeSwitch2-USB, Руководство по сборке, установке и эксплуатации

Страница: 62 / 88

Configuration
15 · G&D TradeSwitch2-USB
Configuration
The configuration of the KVM switch can optionally be changed in the setup mode
or in the setup menu:
 Enable the setup mode using the console keyboard. You can change the configura-
tion via special setup keys.
 The setup menu is operated with a terminal emulator and provides a user interface
to configure the device.
Overview of the functions and default settings
The following table lists functions that can be configured as well as their default set-
tings of the KVM switch.
Detailed description of the functions is given in the following pages:
NOTE: The USB keyboard type (see page 34) can only be selected in the
setup menu
where you can also find the configuration settings of the KVM switch.
Function Default Page
Using single or double hotkeys single hotkeys 19
Changing the single hotkey Alt Gr 20
Changing the double hotkey Alt Gr+Ctrl 21
Changing the select keys 1 and 2 22
Disabling/Enabling the hotkey delay 7 seconds 23
Resetting the defaults 24
Auto-accessing the first channel disabled 25
Enabling/disabling switching via front buttons enabled 26
Enabling/disabling switching via hotkeys enabled 27
Enable/disable switching via step keys disabled 28
Enabling/disabling switching via mouse disabled 29
Enabling »CrossDisplay-Switching« (CDS) disabled 30
Setting the CDS mouse speed 5 31
Changing the bit rate of the Service port 115.200 32
Changing the bit rate of the the RS232 port 115.200 33
Selecting the USB keyboard type PC Multimedia 34
Enabling/Disabling USB 2.0 data transmission enabled 35
USB pinning disabled 36