G&D TradeSwitch2-USB, Руководство по сборке, установке и эксплуатации

Страница: 72 / 88

Configuration
25 · G&D TradeSwitch2-USB
Auto-accessing the first channel
Usually, after turning on the device, the recently active channel is accessed. The set-
ting can be changed so that the computer connected to the first channel is automati-
cally accessed when the device is turned on.
How to disable/enable the automatic access of the first channel after booting:
NOTE: Use the setup menu to enable/disable the option to automatically access
the first channel after booting the device.
Se
tu
p Menu
1. Use the terminal emulator to establish a connection to the KVM switch.
2. Use the
Arrow 
or
Arrow 
keys to select the
Select Ch.1 after Power up
row.
3. Press the
Space
key (repeatedly) to select between the following options:
No
 Accesses the last active channel after booting
Yes
 Accesses channel 1 after booting
4. Press the
S
key to save your settings.