G&D TradeSwitch2-USB, Руководство по сборке, установке и эксплуатации

Страница: 77 / 88

Configuration
G&D TradeSwitch2-USB · 30
English
Enabling »CrossDisplay-Switching« (CDS)
With CrossDisplay-Switching , you can use the mouse to switch between computers
(see page 11).
How to enable/disable »CrossDisplay-Switching«:
NOTE: Use the CrossDisplay-Switching Config Tool to configure both size and order of
the monitors in use if they are of different sizes or not placed next to each other.
Setu
p Mode
1. Press Backspace (default: Alt Gr+Backspace ) to enable the setup
mode.
If the hotkey delay is active, press the key combination for seven seconds .
2. Press one of the setup keys listed below to enable or disable the function:
F3  Enables switching via »CrossDisplay-Switching«
F4  Disables switching via »CrossDisplay-Switching«
Setup
Menu
1. Use the terminal emulator to establish a connection to the KVM switch.
Now plug the serial data cable into the service socket.
2. Use the Arrow  or Arrow  keys to select CrossDisplay-Switching .
3. Press the Space key (repeatedly) to select between the following options:
Off  Disables switching via »CrossDisplay Switching«
On  Enables switching via »CrossDisplay Switching«
4. Press S to save your settings.