G&D TradeSwitch2-USB, Руководство по сборке, установке и эксплуатации

Страница: 70 / 88

Configuration
23 · G&D TradeSwitch2-USB
Disabling/Enabling the hotkey delay
Press the Backspace (default: Alt Gr+Backspace ) key combination for seven
seconds in order to start the setup mode in the default settings.
You can disable the hotkey delay if you want to start the setup mode immediately
after pressing the key combination.
How to enable/disable the hotkey delay:
Setup M
o
de
1. Press Backspace (default: Alt Gr+Backspace ) to enable the setup
mode.
If the hotkey delay is active, press the key combination for seven seconds .
2. Press one of the setup keys listed below to enable/disable the hotkey delay:
7  Enables hotkey delay
8  Disables hotkey delay
Setup Men
u 1. Use the terminal emulator to establish a connection to the KVM switch.
2. Use the
Arrow 
or
Arrow 
keys to select the
Hotkey Delay
row.
3. Press the
Space
key (repeatedly) to enable/disable the hotkey delay:
Yes
 Enables hotkey delay
No
 Disables hotkey delay
4. Press the
S
key to save your settings.