G&D DVIMUX2-DL-PS/2, Инструкция по установке и эксплуатации

Страница: 54 / 80

Configuration
13 · G&D DVIMUX2-DL-PS/2
Operating the setup mode
The setup mode can be enabled using the console keyboard. After enabling, the con-
figuration of the KVM switch can be changed by using various step keys.
How to enable the setup mode:
 Press the Backspace (Standard: Ctrl+Backspace ) key combination to enable
the setup mode.
How to perform a setup function:
 After enabling the setup mode, press one of the setup keys described on the fol-
lowing pages.
How to end the setup mode without performing a function:
 Press ESC to end the setup mode.
NOTE: Only one setup function can be performed after the calling of the setup mode.
If you want to perform more functions, please restart the setup mode.
NOTE: The successful activation of the setup mode is displayed by the blinking
NUM ,  and Scroll control LEDs on the keyboard. Additionally, the yellow User
LED will blink at the KVM switch.
IMPORTANT:
The key combination for enabling the setup mode needs to be
pressed for seven seconds .
After the first call of the setup mode, the hotkey delay can be disabled by pressing
the setup key 8 (see page 20).